e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects

Do-It-Yourself Kit (recommended)

$0

( You Save: $0 )

Buy
With an Assembled & Tested PCB

DIY kit comes with an Assembled and Tested PCB ensuring 100% output guarantee. Includes hardware for assembling project from scratch. Fully supported by elaborate documentation, audio visuals and tools to independently carry out the project work.

PROJECT DESCRIPTION

The main objective of the project is to develop an energy meter to communicate exact billing that each load is going to consume with wireless technology.

An electronic energy meter that delivers unit based pulses is connected to an Opto-coupler that counts the pulses every time the led glows. Depending upon the consumption it gives required interrupt signal to a programmable micro controller of the 8051 family.

The microcontroller takes the reading from the energy meter via an Opto-isolator and displays the reading on the LCD duly interfaced to the microcontroller. The reading of the energy meter is sent wirelessly to the PC user by a serial data transfer through an 2.4 GHz XBee module connected to the microcontroller.

The power supply consists of a step-down transformer 230/12V, which steps down the mains voltage to 12V AC. This is converted to DC using a bridge rectifier and it is then regulated to +5V using a voltage regulator 7805, which is required for the operation of the microcontroller and other components.

×

The main objective of the project is to develop an energy meter to communicate exact billing that each load is going to consume with wireless technology.

An electronic energy meter that delivers unit based pulses is connected to an Opto-coupler that counts the pulses every time the led glows. Depending upon the consumption it gives required interrupt signal to a programmable micro controller of the 8051 family.

The microcontroller takes the reading from the energy meter via an Opto-isolator and displays the reading on the LCD duly interfaced to the microcontroller. The reading of the energy meter is sent wirelessly to the PC user by a serial data transfer through an 2.4 GHz XBee module connected to the microcontroller.

The power supply consists of a step-down transformer 230/12V, which steps down the mains voltage to 12V AC. This is converted to DC using a bridge rectifier and it is then regulated to +5V using a voltage regulator 7805, which is required for the operation of the microcontroller and other components.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
×
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
BLOCK DIAGRAM
Zigbee based Automatic Meter Reading System Zigbee based Automatic Meter Reading System
Hardware Requirements
  • Microcontroller (AT89C52/S52)
  • Max232
  • PC
  • XBEE module
  • LCD(16x2)
  • LED
  • Crystal Oscillator
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Regulator
  • Opto Isolator
  • Energy Meter
  • Lamp.
×
  • Microcontroller (AT89C52/S52)
  • Max232
  • PC
  • XBEE module
  • LCD(16x2)
  • LED
  • Crystal Oscillator
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Regulator
  • Opto Isolator
  • Energy Meter
  • Lamp.
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
  • Languages: Embedded C or Assembly
×
  • Keil compiler
  • Language: Embedded C or Assembly
  • Languages: Embedded C or Assembly
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved