e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
Model: 227    

Do-It-Yourself Kit

$69

( You Save: $0 )

Buy
  • • Product of choice for Engineering & Diploma students worldwide.
  • • Real-time applications.
  • • Mapped to the curriculum.
  • • Learning by doing.
  • • Clearly defined problem statement.
Solderable DIY kit with
"Assembled & Tested Prototype board"

DIY kit comes with an Assembled and Tested prototype board and pre-programmed controller ensuring 100% output guarantee. Includes complete hardware & tools with plain PCB for assembling project from scratch.

Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Simulation, Testing, Troubleshooting and finally building a working Hardware Prototype.

400+ end to end unique project solutions in wide areas of Electronics, Electrical, Embedded, Communication, IoT, Arduino and more.

PROJECT DESCRIPTION

The main objective of this project is to design a wireless transmitter to transmit the audio signals for remote area. The circuit allows you to watch your favorite TV programs at late nights without disturbing other family members. Thisproject works on the principle of FM radio transmission.

Nowadays most of the modern TVs are equipped with audio-in/out and video-in/out RCA sockets. By using an RCA-to-RCA cord, you can connect the audio output of your TV to the transmitter’s input.

The proposed system uses these three components: a variable frequency amplifier, a tuned circuit,an audio amplifier and a battery for power supply.  The variable frequency amplifier is used to increase the signal strength. The frequency is followed by the tuning circuit. The audio amplifier is used to increase the power of the audio signal.

The TV audio output is connected to the transmitter input with the help of the RCA cord. You can listen to this audio on mobile phone by using FM radio.

×

The main objective of this project is to design a wireless transmitter to transmit the audio signals for remote area. The circuit allows you to watch your favorite TV programs at late nights without disturbing other family members. Thisproject works on the principle of FM radio transmission.

Nowadays most of the modern TVs are equipped with audio-in/out and video-in/out RCA sockets. By using an RCA-to-RCA cord, you can connect the audio output of your TV to the transmitter’s input.

The proposed system uses these three components: a variable frequency amplifier, a tuned circuit,an audio amplifier and a battery for power supply.  The variable frequency amplifier is used to increase the signal strength. The frequency is followed by the tuning circuit. The audio amplifier is used to increase the power of the audio signal.

The TV audio output is connected to the transmitter input with the help of the RCA cord. You can listen to this audio on mobile phone by using FM radio.

PROJECT HIGHLIGHTS
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Non-Microcontroller Project.
×
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Non-Microcontroller Project.
BLOCK DIAGRAM
Hardware Requirements
  • Transistors
  • Coils
  • Resistors
  • Trimmers
  • Capacitors & Antenna
×
  • Transistors
  • Coils
  • Resistors
  • Trimmers
  • Capacitors & Antenna
OTHER INFORMATION
Battery not included in the kit due to Courier service prohibition. Please buy Lithium 9 volt battery for this project.
×
Battery not included in the kit due to Courier service prohibition. Please buy Lithium 9 volt battery for this project.
Q & A
Q:  How should I feed the song to the device?
A:  One can feed the song to the device through head phone socket provided on PCB
Q:  Is it possible to transmit the song through a Computer?
A:  Yes it is possible to transmit the song through PC.
Q:  What is the FM range for radio?
A:  The FM band range is from 88MHz to 108MHz.
Q:  Can I also send voice signal?
A:  Yes, one can send voice signal with modification at user end.
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved