Hi Guest
Find Projects
Model: 627    
NEW
$69
$55
50 in Stock
Discount 20%
Buy
$0
Out of Stock
Discount 20%
Buy
$0
Out of Stock
Discount 20%
Buy
PROJECT DESCRIPTION

Voltage Doubler

The aim of this project is to develop a circuit which will step up the applied DC voltage by voltage multiplier principles. A 555 timer is used in astable mode to deliver the output approximately twice the input voltage. The output from the 555 timer is given to a voltage doubler circuit to get the desired output.

This system comprises of a voltage doubler which is a combination of two capacitors and two diodes. It also contains a 555 timer which is running in astable mode. The input voltage applied is around 6 volts DC and the output voltage is around 10 volts DC. The output of 555 timer passes through a voltage doubler to get around 12v DC with 20% regulation owing to circuit parameters. Thus we get 10 volts DC approximately. The load however should be restricted to less than 5 mA as drawing higher current would result in further poor regulation causing the output voltage falling below the expected level. The output voltage can be measured with the help of a multi-meter

Further, the project can be enhanced by adding multiple stages for getting three to ten times the input voltage.

Note: This DIY kit doesn't include soldering iron, multimeter, cutter and screwdriver as it is not required.

One solderless multipurpose breadboard and set of basic components will be provided for each of the 5-in-1 Solderless project kit. This 5-in-1 Solderless Project kit will be provided with additional 4 free circuits which can be built by additionally procuring very few components. Thus, students can explore and develop total 5 projects at the cost of 1 project kit only.

All the engineering, diploma and other technical students from first year to final year can get hands on experience in designing and developing various electronics projects with these 5-in-1 solder less project kits. Completely assembled project is available in image format besides real time working in audio visuals to help students to complete one DIY kit with ease and then try engineering skills to attempt the other free circuits provided as no additional components are required. With this solderless breadboard approach none of the component is soldered, hence all the components can be used again and again to try such multiple circuits.

Note1: All the 5 project circuits are tested and working.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Non-Microcontroller Project.
Call/mail for Tech Support from 10 am - 7 pm IST.
5-in-1 Solderless Breadboard Project.
BLOCK DIAGRAM
Hardware Requirements
  • Resistors, Capacitor
  • Battery, Breadboard
  • LDR, Thermistor
  • Transistor, MOSFET
  • LED, Diodes
  • Comparator IC, 555 TImer
  • Speaker, Buzzer
  • Switch, Preset
  • DC Fan
Software Requirements
    None
OTHER INFORMATION
Battery not included in the kit due to Courier service prohibition. Please buy Lithium 9 volt battery for this project.
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved