e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
>
$389
$311
50 in Stock
Discount 20%
Buy
$349
$279
50 in Stock
Discount 20%
Buy
$59
$47
50 in Stock
Discount 20%
Buy
$311

Do it Yourself kit

For Students

$389
50 in Stock
20%  OFF
$279

Readymade kit

For Students

$349
50 in Stock
20%  OFF
$47

Project kit

For Institution

$59
50 in Stock
20%  OFF
PROJECT DESCRIPTION

The project is designed for LED based street lights with an auto-intensity control that uses solar power from photovoltaic cells. Photovoltaic panels are used for charging batteries by converting the sunlight into electricity. A charge controller circuit is used to control the charging, and an LDR is used to sense the ambient light on day time.

The intensity of street lights is required to be kept high during the peak hours. As the traffic on the road tends to decrease slowly at late nights, the intensity also gets reduced progressively till morning to save energy. Besides the same street lights are switched on at the dusk and then switched off at the dawn automatically by using an LDR sensing device LDR. The process repeats every day.

High Intensity Discharge lamps (HID) generally used for urban street light are based on the principle of gas discharge and thus the intensity is not controllable by any voltage reduction method as the discharge path gets broken.

LED lights are the future of lighting, because of their low energy consumption and long life they are fast replacing conventional lights world over. White light emitting diode (LED)  replaces the HID lamps where intensity control is possible by pulse width modulation.

The intensity control helps in saving energy during late nights while traffic density on the street is low. A programmable microcontroller of the 8051 family is engaged to provide different intensities at different times of the night using PWM technique, for energy saving for solar based system, also using a charge controller for protecting the battery from over charging, overload and deep discharge protection. A light sensing device LDR (Light Dependent Resistance) is used , whose resistance reduces drastically in  day light for sensing purposes.

 Furthermore, the project can be enhanced by using time programmed dusk to dawn switching based on latitude and longitude of a specific location .

×

The project is designed for LED based street lights with an auto-intensity control that uses solar power from photovoltaic cells. Photovoltaic panels are used for charging batteries by converting the sunlight into electricity. A charge controller circuit is used to control the charging, and an LDR is used to sense the ambient light on day time.

The intensity of street lights is required to be kept high during the peak hours. As the traffic on the road tends to decrease slowly at late nights, the intensity also gets reduced progressively till morning to save energy. Besides the same street lights are switched on at the dusk and then switched off at the dawn automatically by using an LDR sensing device LDR. The process repeats every day.

High Intensity Discharge lamps (HID) generally used for urban street light are based on the principle of gas discharge and thus the intensity is not controllable by any voltage reduction method as the discharge path gets broken.

LED lights are the future of lighting, because of their low energy consumption and long life they are fast replacing conventional lights world over. White light emitting diode (LED)  replaces the HID lamps where intensity control is possible by pulse width modulation.

The intensity control helps in saving energy during late nights while traffic density on the street is low. A programmable microcontroller of the 8051 family is engaged to provide different intensities at different times of the night using PWM technique, for energy saving for solar based system, also using a charge controller for protecting the battery from over charging, overload and deep discharge protection. A light sensing device LDR (Light Dependent Resistance) is used , whose resistance reduces drastically in  day light for sensing purposes.

 Furthermore, the project can be enhanced by using time programmed dusk to dawn switching based on latitude and longitude of a specific location .

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
×
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
BLOCK DIAGRAM
Solar Highway Lighting System with Auto Turn Off in Daytime
Hardware Requirements
  • 8051 series Microcontroller
  • White LEDs
  • MOSFET
  • Battery
  • Regulator
  • Solar Panel
  • Day/Night sensor.
×
  • 8051 series Microcontroller
  • White LEDs
  • MOSFET
  • Battery
  • Regulator
  • Solar Panel
  • Day/Night sensor.
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly
×
  • Keil compiler
  • Language: Embedded C or Assembly
OTHER INFORMATION
Battery not included in the kit due to Courier service prohibition. Please buy NI-CAD LEAD ACID Rechargeable 6V battery for this project.
×
Battery not included in the kit due to Courier service prohibition. Please buy NI-CAD LEAD ACID Rechargeable 6V battery for this project.
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
RELATED PROJECTS
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved