e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
>
$469
$375
50 in Stock
Discount 20%
Buy
$409
$327
50 in Stock
Discount 20%
Buy
$59
$47
50 in Stock
Discount 20%
Buy
$375

Do it Yourself kit

For Students

$469
50 in Stock
20%  OFF
$327

Readymade kit

For Students

$409
50 in Stock
20%  OFF
$47

Project kit

For Institution

$59
50 in Stock
20%  OFF
PROJECT DESCRIPTION

This project is designed to control a railway level-crossing gate through an SMS by the station master or driver. This system uses a GSM wireless module for opening and closing the level-crossing gate remotely.

Railway safety is the most crucial aspect of railways all over the world. The cheapest mode of transportation is railways, and therefore, accidents are likely to happen due to careless manual operations. The proposed system is enhanced to prevent accidents at the unmanned level crossings and to provide much needed safety.

This system uses a microcontroller of the 8051 family and a rectified power supply. In this system, a GSM modem is connected to the microcontroller through a level shifter IC for sending the data. The railway gate status is displayed on the LCD display which is interfaced to the microcontroller. A motor is connected to the microcontroller with the help of a driver IC for opening and closing the railway gate.

This allows the station master or driver to send a command from the mobile phone to the GSM modem attached to this system and the GSM modem sends it to the microcontroller. The microcontroller compares this data with the predefined data and if it matches, then the microcontroller generates corresponding signals to the motor driver to operate the motor. The desired number to which the communication takes place is user programmable by a missed call to the gate GSM interfaced microcontroller in select countries.

The scope of this project in future can be enhanced by incorporating a provision for sending an acknowledgement to the sender about the status of the gate via SMS.

×

This project is designed to control a railway level-crossing gate through an SMS by the station master or driver. This system uses a GSM wireless module for opening and closing the level-crossing gate remotely.

Railway safety is the most crucial aspect of railways all over the world. The cheapest mode of transportation is railways, and therefore, accidents are likely to happen due to careless manual operations. The proposed system is enhanced to prevent accidents at the unmanned level crossings and to provide much needed safety.

This system uses a microcontroller of the 8051 family and a rectified power supply. In this system, a GSM modem is connected to the microcontroller through a level shifter IC for sending the data. The railway gate status is displayed on the LCD display which is interfaced to the microcontroller. A motor is connected to the microcontroller with the help of a driver IC for opening and closing the railway gate.

This allows the station master or driver to send a command from the mobile phone to the GSM modem attached to this system and the GSM modem sends it to the microcontroller. The microcontroller compares this data with the predefined data and if it matches, then the microcontroller generates corresponding signals to the motor driver to operate the motor. The desired number to which the communication takes place is user programmable by a missed call to the gate GSM interfaced microcontroller in select countries.

The scope of this project in future can be enhanced by incorporating a provision for sending an acknowledgement to the sender about the status of the gate via SMS.

PROJECT HIGHLIGHTS
Feature - Missed Call Saving in GSM.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
×
Feature - Missed Call Saving in GSM.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • 8051 series Microcontroller
  • GSM modem
  • Crystal
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • LED
  • Level Shifter
  • DC Motor
  • Motor Driver IC
×
  • 8051 series Microcontroller
  • GSM modem
  • Crystal
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • LED
  • Level Shifter
  • DC Motor
  • Motor Driver IC
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
×
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is the RPM of DC motor?
A:  DC motor RPM is 45RPM
Q:  What is GSM?
A:  It stands for Global system for Mobile Communications. It is a communication standard using time division multiple access technique.
Q:  At which frequency range of GSM operates in this project?
A:  Frequency range of GSM is 900MHz
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved