e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
Model: 18    

Do-It-Yourself Kit (recommended)

$199

$159

( You Save: $40 )

Buy
With an Assembled & Tested PCB

DIY kit comes with an Assembled and Tested PCB ensuring 100% output guarantee. Includes hardware for assembling project from scratch. Fully supported by elaborate documentation, audio visuals and tools to independently carry out the project work.

PROJECT DESCRIPTION

The project is designed to control precise temperature using a digital-temperature sensor for industries or medical applications. This system is quite better than the analogue/thermostat system, which has poor accuracy.

The proposed system uses a microcontroller of the 8051 family and a rectified power supply. In this system, a temperature sensor is interfaced to the microcontroller for sensing the temperature. A set of push-button switches are connected to the microcontroller for adjusting the temperature setting.

The load is controlled by the relay, which is interfaced to the microcontroller through a relay driver. The status of the temperature is displayed on 7-segment display, which is connected to the microcontroller.

The digital temperature control system holds the desired temperature at a specific value, and if the temperature exceeds the set-point value, then the lamp is switched off by using the relay as an indication. This system also provides four push-button switches for adjusting the temperature settings. The temperature information is also displayed on the 7-segment display.

×

The project is designed to control precise temperature using a digital-temperature sensor for industries or medical applications. This system is quite better than the analogue/thermostat system, which has poor accuracy.

The proposed system uses a microcontroller of the 8051 family and a rectified power supply. In this system, a temperature sensor is interfaced to the microcontroller for sensing the temperature. A set of push-button switches are connected to the microcontroller for adjusting the temperature setting.

The load is controlled by the relay, which is interfaced to the microcontroller through a relay driver. The status of the temperature is displayed on 7-segment display, which is connected to the microcontroller.

The digital temperature control system holds the desired temperature at a specific value, and if the temperature exceeds the set-point value, then the lamp is switched off by using the relay as an indication. This system also provides four push-button switches for adjusting the temperature settings. The temperature information is also displayed on the 7-segment display.

PROJECT HIGHLIGHTS
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
×
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • 8051 series Microcontroller
  • 7-Segment Displays
  • Temperature Sensor
  • Transformer
  • Crystal
  • Diodes
  • Voltage Regulator
  • LED
  • Resistors
  • Capacitors
  • Push Buttons
  • Relay
  • Lamp
×
  • 8051 series Microcontroller
  • 7-Segment Displays
  • Temperature Sensor
  • Transformer
  • Crystal
  • Diodes
  • Voltage Regulator
  • LED
  • Resistors
  • Capacitors
  • Push Buttons
  • Relay
  • Lamp
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
×
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which temperature sensor is used?
A:  A digital temperature sensor, DS1621 is used in this project.
Q:  Will it sense the body temperature or surrounding?
A:  This project is used to sense the surrounding temperature for incubators.
Q:  Is any alarm operation feasible in this project?
A:  Yes, it is possible in situation like abnormal conditions by the relay provided.
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
RELATED PROJECTS
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved