e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
Model: 557    
1 MATCHING PROJECTS

Do-It-Yourself Kit

$379

( You Save: $0 )

Buy
  • • Product of choice for Engineering & Diploma students worldwide.
  • • Real-time applications.
  • • Mapped to the curriculum.
  • • Learning by doing.
  • • Clearly defined problem statement.
Solderable DIY kit with
"Assembled & Tested Prototype board"

DIY kit comes with an Assembled and Tested prototype board and pre-programmed controller ensuring 100% output guarantee. Includes complete hardware & tools with plain PCB for assembling project from scratch.

Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Simulation, Testing, Troubleshooting and finally building a working Hardware Prototype.

400+ end to end unique project solutions in wide areas of Electronics, Electrical, Embedded, Communication, IoT, Arduino and more.

PROJECT DESCRIPTION

The main objective of the project is to develop an IOT (internet of things) based energy meter reading displayed for units consumed and cost thereupon over the internet in chart and gauge format.

For this innovative work we had taken a digital energy meter whose blinking LED signal is interfaced to a microcontroller of 8051 family through a LDR.. The blinking LED flashes 3200 times for 1 unit .

The LDR sensor  gives an interrupt each time the meter LED flashes to the  programmed micro controller, The microcontroller takes this reading and displays the it on an LCD duly interfaced to the microcontroller.

The reading of the energy meter is also sent to a GSM modem being fed from the microcontroller via level shifter IC and RS232 link. The sim used in the modem being internet enabled transmits the data directly to a dedicated web page for display anywhere in the world in multi level graphical format

 The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components.

×

The main objective of the project is to develop an IOT (internet of things) based energy meter reading displayed for units consumed and cost thereupon over the internet in chart and gauge format.

For this innovative work we had taken a digital energy meter whose blinking LED signal is interfaced to a microcontroller of 8051 family through a LDR.. The blinking LED flashes 3200 times for 1 unit .

The LDR sensor  gives an interrupt each time the meter LED flashes to the  programmed micro controller, The microcontroller takes this reading and displays the it on an LCD duly interfaced to the microcontroller.

The reading of the energy meter is also sent to a GSM modem being fed from the microcontroller via level shifter IC and RS232 link. The sim used in the modem being internet enabled transmits the data directly to a dedicated web page for display anywhere in the world in multi level graphical format

 The power supply consists of a step down transformer 230/12V, which steps down the voltage to 12V AC. This is converted to DC using a Bridge rectifier and it is then regulated to +5V using a voltage regulator 7805 which is required for the operation of the microcontroller and other components.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm IST.
×
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
Call/mail for Tech Support from 10 am - 7 pm IST.
BLOCK DIAGRAM
IOT Based Electricity Energy Meter Reading Through Internet
Hardware Requirements
  • Microcontroller
  • LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • PT
  • CT
  • WiFi module as required
×
  • Microcontroller
  • LCD display
  • A to D converter
  • Temperature sensors
  • Relay
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Voltage Regulator
  • Transistors
  • PT
  • CT
  • WiFi module as required
Software Requirements
  • Keil compiler
  • Language: Embedded C or Assembly.
×
  • Keil compiler
  • Language: Embedded C or Assembly.
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved