e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects

Do-It-Yourself Kit (recommended)

$199

$159

( You Save: $40 )

Buy
With an Assembled & Tested PCB

DIY kit comes with an Assembled and Tested PCB ensuring 100% output guarantee. Includes hardware for assembling project from scratch. Fully supported by elaborate documentation, audio visuals and tools to independently carry out the project work.

PROJECT DESCRIPTION

The project is designed to detect and indicate the water level in a overhead tankusing awater- level sensor placed at the bottom of the tank, andto display the water level on  a7-segment display.

The proposed system isdesigned with  a priority encoder and a few discrete components. The priority encoder is used to detect the water level in the tank, which is interfaced to the circuit through the decoder. The 7-segment display isconnected to the circuit for displaying the water level, digitally.This circuit works with a rectified-power supply.

This project uses a priority encoder thatacts as awater-level sensor; the sensor is placed at the bottom of the tank to find the water level in the tank. The priority encoder has 9-active –low inputs thatindicate water level and display the water level in the tankdigitally on the7-segment display using the decoder. This project in future can be enhanced by interfacing it with a buzzer to alert when the water level falls below the minimum level.

×

The project is designed to detect and indicate the water level in a overhead tankusing awater- level sensor placed at the bottom of the tank, andto display the water level on  a7-segment display.

The proposed system isdesigned with  a priority encoder and a few discrete components. The priority encoder is used to detect the water level in the tank, which is interfaced to the circuit through the decoder. The 7-segment display isconnected to the circuit for displaying the water level, digitally.This circuit works with a rectified-power supply.

This project uses a priority encoder thatacts as awater-level sensor; the sensor is placed at the bottom of the tank to find the water level in the tank. The priority encoder has 9-active –low inputs thatindicate water level and display the water level in the tankdigitally on the7-segment display using the decoder. This project in future can be enhanced by interfacing it with a buzzer to alert when the water level falls below the minimum level.

PROJECT HIGHLIGHTS
Non-Microcontroller Project.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
×
Non-Microcontroller Project.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • Transformer
  • Diodes
  • Resistor
  • Capacitor
  • Transistor
  • 7-Segment Display
  • Encoder
  • Decoder
×
  • Transformer
  • Diodes
  • Resistor
  • Capacitor
  • Transistor
  • 7-Segment Display
  • Encoder
  • Decoder
Q & A
Q:  What is water level indication?
A:  It indicates the level of water in the tank
Q:  Can this also be used for other purpose?
A:  Yes, it can be used for any partially conducting non corrosive and non inflammable liquid.
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
RELATED PROJECTS
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved