Hi Guest
Find Projects
Model: 152    
1 MATCHING PROJECTS
$669
$535
50 in Stock
Discount 20%
Buy
$579
$463
50 in Stock
Discount 20%
Buy
$69
$55
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

We all are well aware of the major fire accidents that frequently take place in nuclear power plants, petroleum refineries, gas tanks, chemical factories and other large scale industrial units and result in very serious consequences. Thousands of people have lost their lives due to such hazardous accidents. Therefore, the main objective of this project is to develop a robotic vehicle capable of fighting the fire remotely by using an RF technology, in the event of any major fire accidents in industries.

An RF transmitter is connected to the transmitter end with the help of an encoder device. Push buttons are connected to the microcontroller as input switches. Commands are sent by the push buttons to the receiver to control the movement of the robot either in forward, backward, left or right directions.

An RF receiver is connected to the receiver end with help of a decoder device. The two motors are interfaced to the microcontroller through a motor driver IC, which is used to change the directions of the motor. This system works with an 8051 family microcontroller and a battery for power supply.

A robotic vehicle is loaded with a water tanker. The pump is remotely controlled by the RF commands sent by the transmitter, and, based on these commands, the receiver controls the directions of water jet to the fire.

The future scope of this project can be implemented by interfacing it with a wireless camera so that a user can see the operation of this remote robot clearly on a screen.

PROJECT HIGHLIGHTS
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • 8051 series Microcontroller
  • Push Buttons
  • RF Tx-Rx
  • Encoder
  • Decoder
  • DC Motors
  • Relay
  • Transistor
  • Robot Body with Water Tank
  • Resistors
  • Capacitors
  • Diode
  • Battery
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is the battery rating?
A:  2 numbers of 6V rechargeable batteries are usedfor receiver and four numbers of 1.5V pencil cellfor transmitter
Q:  What is the RPM of robot motors?
A:  The motor RPM is 45.
Q:  How can I control the movement of robot?
A:  By RF transmitter remote using push buttons provided one can control the robot movement in left, right, forward, reverse directions.The Nozzle movement in all directions can also be controlled.
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved