e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
Model: 494    
1 MATCHING PROJECTS

Do-It-Yourself Kit

$149

( You Save: $0 )

Buy
  • • Product of choice for Engineering & Diploma students worldwide.
  • • Real-time applications.
  • • Mapped to the curriculum.
  • • Learning by doing.
  • • Clearly defined problem statement.
Solderable DIY kit with
"Assembled & Tested Prototype board"

DIY kit comes with an Assembled and Tested prototype board and pre-programmed controller ensuring 100% output guarantee. Includes complete hardware & tools with plain PCB for assembling project from scratch.

Extensive documentation for project execution including step-by-step instructions for Circuit building, Assembly procedure and Troubleshooting. Thorough understanding from the Problem definition to Circuit Design to Programming, Simulation, Testing, Troubleshooting and finally building a working Hardware Prototype.

400+ end to end unique project solutions in wide areas of Electronics, Electrical, Embedded, Communication, IoT, Arduino and more.

PROJECT DESCRIPTION

The main intention of this project is to control  speed of a fan wirelessly using a standard TV remote based on a thyristor power control method.

The proposed system uses a microcontroller of the 8051 and a load is controlled by a TRAIC duly interfaced to the microcontroller. A standard TV remote sends infrared coded data to the control board, which is received by an IR sensor (at the receiver end) and interfaced to the microcontroller. 

If any button is pressed on the remote, then it sends an infrared coded data within a specific range. This coded data received is executed by the microcontroller to deliver delayed firing pulses to the thyristor, and then it switches the fan power accordingly the respective speed. Firing angle is displayed on a 7-segment display. In this project, a lamp is provided in place of the fan for demonstration purposes.

The future scope of this project can be enhanced by adding more outputs from the microcontroller feeding relay drivers to switch on/off domestic loads together with the speed control of the fan.

×

The main intention of this project is to control  speed of a fan wirelessly using a standard TV remote based on a thyristor power control method.

The proposed system uses a microcontroller of the 8051 and a load is controlled by a TRAIC duly interfaced to the microcontroller. A standard TV remote sends infrared coded data to the control board, which is received by an IR sensor (at the receiver end) and interfaced to the microcontroller. 

If any button is pressed on the remote, then it sends an infrared coded data within a specific range. This coded data received is executed by the microcontroller to deliver delayed firing pulses to the thyristor, and then it switches the fan power accordingly the respective speed. Firing angle is displayed on a 7-segment display. In this project, a lamp is provided in place of the fan for demonstration purposes.

The future scope of this project can be enhanced by adding more outputs from the microcontroller feeding relay drivers to switch on/off domestic loads together with the speed control of the fan.

PROJECT HIGHLIGHTS
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
×
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Fan Speed Control by TV Remote
Hardware Requirements
  • OP-Amp
  • TRIAC
  • Opto-isolator
  • Resistors
  • Capacitors
  • Diodes
  • LED
  • Transformer
  • Voltage Regulator
  • 8051 series Microcontroller
  • TSOP (IR sensor)
  • 7 Segment Display
  • TV remote
×
  • OP-Amp
  • TRIAC
  • Opto-isolator
  • Resistors
  • Capacitors
  • Diodes
  • LED
  • Transformer
  • Voltage Regulator
  • 8051 series Microcontroller
  • TSOP (IR sensor)
  • 7 Segment Display
  • TV remote
Software Requirements
  • Keil compiler
  • Languages: Embedded C or Assembly
×
  • Keil compiler
  • Languages: Embedded C or Assembly
Q & A
Q:  Which microcontroller is used in this project?
A:  A 40 pin microcontroller from 8051 family is used in this project.
Q:  What is remote AC power control?
A:  Remotely or wirelessly controlling load with the help of a TV remote, this is also be done with Bluetooth. See model no. 329. Follow the link: http://www.edgefxkits.in/remote-induction-motor-control-by-android-application-with-7-segment-display
Q:  Can I use a motor instead of the lamp?
A:  Yes, an AC motor with rating- ¼ HP, 230V can be used.
Q:  What is the purpose of 7 segment display?
A:  The 7 segment display shows the button pressed on the TV remote for the delay angle
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
RELATED PROJECTS
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved