e.g. - "communication: RFID" Search tips
Hi Guest
Find Projects
>
$509
$407
50 in Stock
Discount 20%
Buy
$449
$359
52 in Stock
Discount 20%
Buy
$69
$55
50 in Stock
Discount 20%
Buy
$407

Do it Yourself kit

For Students

$509
50 in Stock
20%  OFF
$359

Readymade kit

For Students

$449
52 in Stock
20%  OFF
$55

Project kit

For Institution

$69
50 in Stock
20%  OFF
PROJECT DESCRIPTION

The main aim of this project is to monitor any power drawn  before the energy meter which is treated as power pilferage .Once such power is detected it results in disconnection of the power supply to the consumer and an SMS is sent to the control station to take penal action on  the fraud consumer.

Electricity is a necessary energy for our daily life; with the increasing demand of electricity,  power theft is also increasing that affects power sector across the whole country.

The objective of this project is to design a system that avoids such situation . For this project, an 8051 family of microcontroller is used to continuously monitor the load consumption before and after the energy meter . Any difference noticed between the input power and the output power from the meter is detected by a special  CT feeding a signal to a through an Opto-coupler.

In demonstrating the project function , a fixed load of 100 watt lamp is connected duly from the output of a standard energy meter and a provision is kept with a lamp holder  that is wired before the meter connection .The moment any load is connected to this lamp holder the sensing takes place for action as described as above. It triggers the generation of an SMS, and then the status of the system is also displayed on an LCD.

The information, in the form of a message fed from the microcontroller via a level shifter IC and RS232 link, is sent to any cell phone through a GSM modem.

The project can be extended further to larger current loads and send the energy consumption details remotely on smart mobile phone by using Bluetooth technology.

×

The main aim of this project is to monitor any power drawn  before the energy meter which is treated as power pilferage .Once such power is detected it results in disconnection of the power supply to the consumer and an SMS is sent to the control station to take penal action on  the fraud consumer.

Electricity is a necessary energy for our daily life; with the increasing demand of electricity,  power theft is also increasing that affects power sector across the whole country.

The objective of this project is to design a system that avoids such situation . For this project, an 8051 family of microcontroller is used to continuously monitor the load consumption before and after the energy meter . Any difference noticed between the input power and the output power from the meter is detected by a special  CT feeding a signal to a through an Opto-coupler.

In demonstrating the project function , a fixed load of 100 watt lamp is connected duly from the output of a standard energy meter and a provision is kept with a lamp holder  that is wired before the meter connection .The moment any load is connected to this lamp holder the sensing takes place for action as described as above. It triggers the generation of an SMS, and then the status of the system is also displayed on an LCD.

The information, in the form of a message fed from the microcontroller via a level shifter IC and RS232 link, is sent to any cell phone through a GSM modem.

The project can be extended further to larger current loads and send the energy consumption details remotely on smart mobile phone by using Bluetooth technology.

PROJECT HIGHLIGHTS
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
×
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Call/mail for Tech Support from 10 am - 7 pm IST.
BLOCK DIAGRAM
Detecting Power Theft prior to feeding energy Meter and Intimating to Control Room by GSM
Hardware Requirements
  • Microcontroller (AT89C52/S52)
  • Max232
  • GSM module
  • LCD(16x2)
  • LED
  • Crystal Oscillator
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Regulator
  • Opto Isolator
  • Energy Meter
  • Lamp.
×
  • Microcontroller (AT89C52/S52)
  • Max232
  • GSM module
  • LCD(16x2)
  • LED
  • Crystal Oscillator
  • Resistors
  • Capacitors
  • Diodes
  • Transformer
  • Regulator
  • Opto Isolator
  • Energy Meter
  • Lamp.
Software Requirements
  • Keil compiler
  • Language: Embedded C Or Assembly
×
  • Keil compiler
  • Language: Embedded C Or Assembly
READ WHAT OTHERS HAVE SAID
×
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved