Hi Guest
Find Projects
$379
$303
50 in Stock
Discount 20%
Buy
$339
$271
50 in Stock
Discount 20%
Buy
$59
$47
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main concept of this project is to maintain continuous AC supply to a single-phase load by an auto-changeover of load from the missing phase to any available phase in a three-phase system.

The proposed system uses a rectified-power supply. In this system, three phases areconnected to the control circuit through an Optoisolatorafterreducing the voltage level and rectifying it to DC using  a step-down transformer and a half-wave rectifier, respectively. The load is selected from any of the availablethree phases, automatically, using relays,which are interfaced to the relay driver IC. The logic gates are used for detecting the availability of the phase.

The circuit is connected in such a way that the relays connected to the phase feeding the load are always energized. In case of the failure of this phase, the logic gates automatically generate an output to drive, so that the next relay is activated to connect the other available phases to feed the load.

This project in future can be enhanced by incorporating power semiconductor devices such as thyristors/IGBTs for instantaneous changeover to the next available phase. This overcomes the drawback of the change over time generally witnessed by the relay switching operations.

PROJECT HIGHLIGHTS
Non-Microcontroller Project.
Automatic Power Source Selection.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • Transformers
  • Logic Gates
  • Resistors
  • Capacitors
  • Relay Driver
  • Relays
  • Lamp
  • Diodes
Software Requirements
  • None
Q & A
Q:  What is the concept behind this project?
A:  The concept behind this project is to provide uninterrupted power supply from any available phase supply.
Q:  Can any other loads be used?
A:  Yes up to 200W, single phase load can be replaced
Q:  What is auto selection?
A:  Automatically selecting the available supply from 3 phase supply and inverter supply is known as auto selection.
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved