Hi Guest
Find Projects
Model: 352    
2 MATCHING PROJECTS
$439
$351
50 in Stock
Discount 20%
Buy
$389
$311
50 in Stock
Discount 20%
Buy
$69
$55
50 in Stock
Discount 20%
Buy
PROJECT DESCRIPTION

The main aim of the project is to control the home applications remotely using Android OS smart phones with an Arduino board. This is an advanced technology in the home automation, so houses are getting smarter.

Usually conventionalwall switches are located in different parts of the house and often require persons for their operations and, thus, manual pressing turn themon and off. It becomes very difficult for the elderly or physically handicapped people to operate them. This system is enhanced to control the home applications through an Android applicationof smart/ tablet phones by entering the selected number for corresponding load.

The proposed system uses an Arduino board and a rectified power supply. A Bluetooth is interfaced to the Arduino board using Rx and Tx pins for communication. The electrical loads are controlled by the TRIAC device which is connected to the Arduino board through opto-isolator. Opto-coupler is connected to trigger the back-to-back SCRs (TRIACS) with isolation from the controlling section.

If an owner connectshis/her Android application device toan Arduino systemthrough Bluetooth then he/she can send the control signals through the Bluetooth attached to the Arduino system. He/she can enter the selected optionin the Android application on the GUI for corresponding loads and that data is sent to the Arduino system. The received data is compared with the stored data in the Arduino and, if it matches, then the microcontrollerwill perform thedesired operation.

PROJECT HIGHLIGHTS
Remote load switching @ ZVS point.
Call/mail for Tech Support from 10 am - 7 pm IST.
Easy to use, Self-explanatory kit.
All-inclusive solution kit.
Extensive audio-visuals available.
Branding-free material.
Pre-programmed Microcontroller.
BLOCK DIAGRAM
Hardware Requirements
  • Arduino board
  • Blue tooth module
  • Transformer
  • Opto-isolator
  • TRIAC
  • Voltage Regulator
  • Crystal
  • Diodes
  • ATmega AVR series Microcontroller
  • Resistors
  • Capacitors
  • Lamps
Software Requirements
  • Arduino software
  • Languages: Arduino Programming language
Q & A
Q:  What is home automation?
A:  Activating the home appliances without conventional switch but by using a smart phone is known as home automation.
Q:  Is it possible to replace the lamps by any domestic load
A:  Yes, it is possible to replace the lamps by any domestic load, but only with rating up to 200W.
Q:  Which microcontroller is used in this project?
A:  Arduino ATMEGA328 microcontroller is used and development board is also provided with this project
Q:  What type of smart phone is used to operate this project
A:  Any mobile phone which has Android OS is used in this project.
READ WHAT OTHERS HAVE SAID
Be the first person to review this project
WRITE A REVIEW
Name
Email
Location
Feedback
Please enter security code
Value
Quality
Rating Breakdown (0 Reviews)
0
0
0
0
0
SIGN UP FOR NEWSLETTER



Edgefx Technologies,
1001 Bayhill Drive, 2nd Floor,San Bruno,
CA - 94066, United States of America.
© 2012 Edgefx Technologies Pvt Ltd. All Rights Reserved